INFORMATION REQUIRED IN ORDER TO ACCURATELY PROVIDE YOU AN ESTIMATE

1. DEALER/DESIGNER/CONTRACTOR NAME, ADDRESS & PHONE/FAX

2. JOB NAME & LOCATION:

3. TYPE OF EXISTING COUNTERTOP (NONE, LAMINATE, TILE):

4. COUNTERTOP MATERIAL NAME BRAND SELECTION:

5. COUNTERTOP COLOR OR PATTERN SELECTION:

6. SIMPLE DRAWING THAT INCLUDES:
* CABINET BACKWALL DIMENSIONS (INCHES)
* ISLAND OR PENINSULA DEPTHS
* SHOW WINDOW SILLS, WALL CAPS AND OVERHANGS
* RADIUS CORNERS & ANY 45� INSIDE CORNER CABINET ANGLES

7. EDGE DETAIL TYPE:
* STANDARD (ROUNDOVER, BEVEL, OGEE, CLASSIC, ETC)
* CUSTOM (TALLER THAN 1 1/2", BULLNOSE, NO DRIP, INLAY)

8. BACKSPLASH TYPE:
* NONE
* STANDARD PLANT-ON (APPROX 4")
* TALLER ( REQUIRED FOR EXISTING TILE TEAROUT JOBS)
* FULL HEIGHT (TO BOTTOM OF UPPER CABINET) OR FULL HEIGHT BEHIND STOVE ONLY
* COVED

9. SINK TYPE:
* INTEGRAL SOLID SURFACE (MODEL AND COLOR)
* UNDERMOUNT (CAST IRON OR STAINLESS STEEL)
* TOPMOUNT (SELF RIMMING SINKS)

10. STOVE TYPE
* DROP IN COOKTOP
* FREE STANDING (FS)
* SLIDE IN (SOFT SEAM REAR COUNTERTOP STRIP)

11. WINDOW SILLS OR WALL CAPS:
* LENGTH, DEPTH, AND HEIGHT ABOVE THE COUNTERTOP

12. SUPPORTS FOR OVERHANGING COUNTERTOPS:

13. RADIUS DIMENSIONS & LOCATIONS:


To contact us by e-mail you may use the form below.
* = Required
*
*
*
*